KINEFLO HEATERS WITH STATE-OF-THE- ART LOW EMISSIONS AND EFFICIENCY UP TO 90 %

The Devco KINEFLO heater is a convective heater designed with a controlled separate heat transfer section bringing a unique solution to sensitive heating applications. The Devco KINEFLO heater design eliminates the conventional radiant heat transfer section. Result is the process fluid is primarily heated by safe forced convection. This is achieved with separate partitioned combustion and heat exchange sections, designed for optimum heat transfer control. Radiant heat transfer is virtually eliminated by quenching the combustion products to a maximum 1600 deg F. prior to entering the heat exchange section. Devco KINEFLO heaters range from 0.5 to 100.0 MMBtu/Hr.

SAFETY

EMISSIONS

Options are available to provide your Devco KINEFLO convective heater with state-of-the-art low emission combustion systems to meet today’s environmentally friendly requirements.

INSULATION

MULTI – FUEL CAPABILITY

TURNDOWN

The standard automated forced draft burner system has a 10:1 turndown ratio. Options to increase the turndown ratio are available.

EFFICIENCY

INSTALLATION

INSTRUMENTATION

The basic Devco KINEFLO heater includes our standard PLC burner management system ( BMS ). Options are available to provide a customized state-of-the-art BMS to meet any specification (e.g. IRI , NFPA, BASEEFA, and ATEX) and your specific information requirements.

[su_divider]

EQUIFLO HEATERS WITH STATE-OF-THE- ART LOW EMISSIONS AND EFFICIENCY UP TO 90 %

The Devco EQUIFLO heater provides a safe controlled convective heat transfer environment for special process fluid applications. Heat is transferred unevenly in conventional direct-fired radiant heaters, creating hot spots. This leads to undesirable process fluid thermodegradation and/or scaling.The unique Devco EQUIFLO convective heater employs a special high energy burner with two significant features. First, direct radiant heat exposure to the process coil is eliminated by the specially designed combustion chamber. Second, the distinctive burner high energy environment induces flue gas recirculation throughout the heat exchange zone. The resultant effect is a maximum 1600 deg F temperature exposure to the process coil. Devco EQUIFLO heaters range from 0.5 to 100.0 MMBtu/Hr.

SAFETY

EMISSIONS

Options are available to provide your Devco EQUIFLO convective heater with state-of-the-art low emission combustion systems to meet today’s environmentally friendly requirements…

INSULATION

MULTI – FUEL CAPABILITY

TURNDOWN

The standard automated forced draft burner system has a 10:1 turndown ratio. Options to increase the turndown ratio are available.

EFFICIENCY

INSTALLATION

INSTRUMENTATION

The basic Devco EQUIFLO heater includes our standard PLC burner management system ( BMS ). Options are available to provide a customized state-of-the-art BMS to meet any specification (e.g. IRI , NFPA, BASEEFA, and ATEX) and your specific information requirements.

[su_divider]

CONVECTO HEATERS WITH STATE-OF-THE- ART LOW EMISSIONS AND EFFICIENCY UP TO 90 %

The Devco CONVECTO heater is a convective heater designed with a controlled separate heat transfer section bringing a unique solution to sensitive heating applications. The Devco CONVECTO heater design eliminates the conventional radiant heat transfer section.Result is the process fluid is primarily heated by safe forced convection. This is achieved with two separate isolated components for the combustion and heat exchange sections, designed for optimum heat transfer control. Radiant heat transfer is virtually eliminated by quenching the combustion products to a maximum 1600 deg F prior to entering the heat exchange section. Devco CONVECTO heaters range from 0.5 to 100.0 MMBtu/Hr.

SAFETY

EMISSIONS

Options are available to provide your Devco CONVECTO convective heater with state-of-the-art low emission combustion systems to meet today’s environmentally friendly requirements.

INSULATION

MULTI – FUEL CAPABILITY

TURNDOWN

The standard automated forced draft burner system has a 10:1 turndown ratio. Options to increase the turndown ratio are available.

EFFICIENCY

INSTALLATION

INSTRUMENTATION

The basic CONVECTO heater includes our standard PLC burner management system ( BMS ). Options are available to provide a customized state-of-the-art BMS to meet any specification (e.g. IRI , NFPA, BASEEFA, and ATEX) and your specific information requirements.

[su_divider]